|
Key Specifications
Product Description
The UM5059 ESD protection diode is designed to replace multilayer varistors (MLVs) in portable applications such as cell phones, notebook computers, and PDA’s. They feature large cross-sectional area junctions for conducting high transient currents, offer desirable electrical characteristics for board level protection, such as fast response time, lower operating voltage, lower clamping voltage and no device degradation when compared to MLVs. The UM5059 ESD protection diode protects sensitive semiconductor components from damage or upset due to electrostatic discharge (ESD) and other voltage induced transient events. The UM5059 is available in DFN2 1.0×0.6 (compatible with SOD923 & SOD882) package with working voltages of 5 volt. It gives designer the flexibility to protect one unidirectional line in applications where arrays are not practical. Additionally, it may be “sprinkled” around the board in applications where board space is at a premium. It may be used to meet the ESD immunity requirements of IEC 61000-4-2, ±30kV air, ±30kV contact discharge.
Features
- Transient Protection for Data Lines to
IEC 61000-4-2 (ESD) ±30kV (Air), ±30kV (Contact)
- Small Package for Use in Portable Electronics
- Suitable Replacement for MLV’s in ESD Protection Applications
- Protect One I/O or Power Line
- Low Clamping Voltage
- Stand Off Voltage: 5V
- Low Leakage Current
- Solid-State Silicon-Avalanche Technology
- Small Body Outline Dimensions: 1.0mm×0.6mm
Applications
- Cell Phone Handsets and Accessories
- Personal Digital Assistants (PDAs)
- Notebooks, Desktops and Servers
- Portable Instrumentation
- Cordless Phones
- Digital Cameras
- Peripherals
- MP3 Players
Pin Configurations
 Electrical Characteristics
(T=25°C, Device for 5.0V Reverse Stand-off Voltage)
Ordering Information
|
Application Notes
Product Selection Guide
Product Search
Product You Recently Viewed
|
