Key Specifications

UM5202EEDF is surge rated diode arrays designed to protect high speed data interfaces. This series has been specifically designed to protect sensitive components which are connected to data and transmission lines from over-voltage caused by ESD (electrostatic discharge).

The unique design incorporates surge rated, low capacitance steering diodes and a TVS diode in a single package. During transient conditions, the steering diodes direct the transient to either the positive side of the power supply line or to ground. The internal TVS diode prevents over-voltage on the power line, protecting any downstream components.

The low capacitance array configuration allows the user to protect two high-speed data or transmission lines. The low inductance construction minimizes voltage overshoot during high current surges. This device is optimized for ESD protection of portable electronics. They may be used to meet the ESD immunity requirements of IEC 61000-4-2, Level 4 (±15kV air, ±8kV contact discharge).

 

 

- Transient Protection for High-Speed Data Lines to IEC 61000-4-2 (ESD) ±15kV (Air), ±8kV (Contact)

- Array of Surge Rated Diodes with Internal TVS Diode

- Protects Two I/O Lines & Power Line

- Low Capacitance (<2pF) for High-Speed Interfaces

- No Insertion Loss to 2.0GHz

- Low Leakage Current and Clamping Voltage

- Low Operating Voltage: 5.0V

- Solid-State Silicon-Avalanche Technology

 

- USB 2.0

- USB OTG

- Monitors and Flat Panel Displays

- Digital Visual Interface (DVI)

- High-Definition Multimedia Interface (HDMI)

- SIM Ports

- IEEE 1394 Firewire Ports

 

Electrical Characteristics

Parameter	Symbol	Test Conditions	Min	Typ	Max	Unit
Reverse Stand-Off Voltage	VRWM				5.0	V
Reverse Breakdown Voltage	VBR	IT=1mA, Pin 4 to Pin 1	6.0			V
Reverse Leakage Current	IR	VRWM=5V, T=25°C, Pin 4 to Pin 1			2	µA
Clamping Voltage	VC	IPP=1A, 8/20µs, Any Pin to Pin 1			15	V
Clamping Voltage	VC	IPP=6A, 8/20µs, Any Pin to Pin 1			25	V
Junction Capacitance	Cj	VR=0V, f=1MHz,  Any I/O Pin to Pin 1			2	pF
		VR=0V, f=1MHz , Between I/O Pins			1	pF
		VR=0V, f=1MHz, Pin 4 to Pin 1		60		pF
		VR=2.5V, f=1MHz, Pin 4 to Pin 1		40		pF
Reverse Recovery Time	Trr	Pin 1to Pin 4		40		ns
		Pin 1 to I/O Pin		160		ns
		Pin 4 to I/O Pin		45		ns

 

Note 1: I/O pins are pin 2, 3.

Part Number	Working Voltage	Packaging Type	Channel	Marking Code	Shipping Qty
UM5202EEDF	5.0V	SOT143	2	U2A	3000pcs/7Inch Tape & Reel