首页 > 英联产品 > 接口 > RS232接口
UM208EEAOR
低功耗,高ESD保护的+5V RS232收发器
Datasheet Reliability Report Package Information Order Sample  
Key Specifications
Part Number Description Status Drivers Per Package Receivers Per Package Logic Voltage (Min)(V) ICC (Max)(mA) Shutdown Control Data Rate(kbps) Main Supply Voltage (Nom)(V) ESD HBM (kV) ESD Contact (kV) ESD Air (kV) Operating Temperature Range(℃) Pin/Package EV Kit Available?
UM208EEAOR 低功耗,高ESD保护的+5V RS232收发器 Active 4 4 3.3 1 No 250 5 ±15 ±8 ±15 -40 ~ +85 24/SSOP
View All>>
Product Description
 
The UM207/208/211/213 are enhanced transceivers intended for use in RS-232 and V.28 serial communication and are particularly suited for those applications where ±12V is not available. These devices feature very low power consumption and +5V single supply operation making them ideal for space-constrained applications. With integrated charge pump circuitry and small 0.1µF charge pump capacitors, these devices can fully meet RS-232 voltage levels. A slow rate limited transmitter circuit improves data integrity. The receiver features hysteresis to greatly improve noise rejection. The UM211 and UM213 feature a low power shutdown mode, which reduces power supply drain to 1µA. The UM213 includes two receivers that remain active during shutdown to monitor for signal activity.
The drivers maintain the ±5V EIA/TIA-232E output signal levels at data rates in excess of 250kbps when loaded in accordance with the EIA/TIA-232E specification Driver output and receiver input pins are protected against ESD to over ±15kV for both human body mode and IEC61000-4-2 air discharge mode.
The UM207/208 series are available in SOP24, SSOP24 and TSSOP24 packages, the UM211/213 are available in SOP28, SSOP28 and TSSOP28 packages.
 
  
Features
 
- Meets All EIA/TIA-232 and ITU V2.8 Specifications
- Single +5V Supply Operation
- 4 ×0.1µF External Charge Pump Capacitors
- Typical 250kbps Transmission Rate
- 1mA Typical Static Supply Current
- 1μA Shutdown Mode (UM211/213)
- Two Wake-Up Receivers (UM213)
- Tri-State/Rx Enable (UM211/213)
- Enhanced ESD Specifications for RS-232 Pins:
±15kV Human Body Mode
±15kV IEC61000-4-2 Air Discharge Mode
±8kV IEC61000-4-2 Contact Discharge Mode
- Available in SOP24, SSOP24, TSSOP24, SOP28, SSOP28, TSSOP28 Packages

 
Typical Application Circuit


 
Applications
 
- Computer-Portable, Mainframe, Laptop
- Handheld Equipments
- Battery-Powered Equipments
- Instrumentation, UPS
- Printers and Terminals
 
 
Pin Configurations  

                             SSOP24
 
Ordering Information

Part Number
Temp. Range
Package Type
Shipping Qty
UM208EEAOR
-40°C to +85°C
SSOP24
2000pcs/13 Inch
Tape&Reel
Application Notes
微处理器超长启动周期中的外部看门狗管理方案v2.pdf
利用3.3V供电RS485接口实现远距离数据通信.pdf
高速低电源电压逻辑电平转换电路.pdf
超低功耗LDO线性稳压器.pdf
I2C-BUS电平转换芯片在安防产品的应用.pdf
0201超小封装ESD保护器件.pdf
Analog Switch Permits Port Sharing in Portable Equipment.pdf
Balanced Modulator Demodulator Employing UM4684.pdf
Level Shifter for High Speed and Wide Voltage Range Interface.pdf
Low Resistance Analog Switches Permit Speaker Switching in Audio Devices.pdf
Low-Icct Analog Switches for Ultra-Portable Designs.pdf
Selecting the Right CMOS Analog Switch.pdf
Product Selection Guide
Interface and System Interconnect Selection Guide.pdf
Product Search
Parametric Search
Product You Recently Viewed
@2014 Union Semiconductor Limited. All rights Reserved.
FOLLOW US