f3gh54ehyx|1000C140cn_category|p_desc
f3gh54ehy8|0000C140CBE9|cn_category|p_desc|F621E88E-D2E3-480F-9F7C-FC25919FCCDB
" /> UM3302H-电平转换器-接口-英联产品-英联
首页 > 英联产品 > 接口 > 电平转换器
UM3302H
具有自动方向检测和±5kV ESD保护的2位双向电压电平转换器
Datasheet Reliability Report Package Information Order Sample  
Key Specifications
Part Number Description Status VCCA(Min)(V) VCCA(Max)(V) VCCB(Min)(V) VCCB(Max)(V) Max Data Rate(Mbps) No. of Bits Operating Temperature Range(℃) Pin/Package EV Kit Available?
UM3302H 具有自动方向检测和±5kV ESD保护的2位双向电压电平转换器 ACTIVE 1.2 3.6 1.65 5.5 100 2 -40 to 85 8/CSP 1.9×0.9 Y
View All>>
Product Description
 
The UM3302, an ESD protected level translator, provides the level shifting necessary to allow data transfer in multi-voltage system. This 2-channel non-inverting translator uses two separate configurable power-supply rails. The A port is designed to track VCCA. VCCA accepts any supply voltage from 1.2V to 3.6V. The B port is designed to track VCCB. VCCB accepts any supply voltage from 1.65V to 5.5V. This allows for universal low-voltage bidirectional translation between any of the 1.2V, 1.5V, 1.8V, 2.5V, 3.3V, and 5V voltage nodes. Both I/O ports are auto-sensing; thus, no direction pin is required, making it ideal for data transfer between low-voltage ASICs/PLDs and higher voltage systems.
The UM3302 operates at a guaranteed data rate of 20Mbps over the entire specified operating voltage range. Within specific voltage domains, higher data rates are up to 100Mbps.
When the output-enable (OE) input is low, all outputs are placed in the high-impedance state. The UM3302 is designed so that the OE input circuit is designed to track VCCA.
To ensure the high-impedance state during power up or power down, OE should be tied to GND through a pull down resistor; the minimum value of the resistor is determined by the current-sourcing capability of the driver.
The UM3302H is a dual channel level translator available in 1.90mm×0.90mm CSP8 bump package while the UM3302M8 is available in MSOP8 package.
 
Features
 
- 1.2V to 3.6V on A Port and 1.65V to 5.5V on B Port (VCCA ≤VCCB)
- VCC Isolation Feature – If Either VCC Input is at GND, All Outputs are in the High-Impedance State
- OE Input Circuit Referenced to VCCA
- Low Power Consumption
- Latch-Up Performance Exceeds 100mA
- ±5kV ESD Protection on B Ports
  
Typical Application Circuit
 
 
 
Applications
 
- Low-Voltage ASIC Level Translation
- Cell-Phone Cradles
- Portable POS Systems
- Portable Communication Devices
- Low-Cost Serial Interfaces
- Cell-Phones
- GPS
- Telecommunications Equipment
 
Pin Configurations  
                
          (Top View)

            UM3302H

Ball Mapping for UM3302H



   Transparent Top View
 
Ordering Information
 
Part Number
Packaging Type
Marking Code
Shipping Qty
UM3302H
CSP8 1.9×0.9
EBB
3000pcs/7Inch
Tape & Reel
 
Application Notes
微处理器超长启动周期中的外部看门狗管理方案v2.pdf
利用3.3V供电RS485接口实现远距离数据通信.pdf
高速低电源电压逻辑电平转换电路.pdf
超低功耗LDO线性稳压器.pdf
I2C-BUS电平转换芯片在安防产品的应用.pdf
0201超小封装ESD保护器件.pdf
Analog Switch Permits Port Sharing in Portable Equipment.pdf
Balanced Modulator Demodulator Employing UM4684.pdf
Level Shifter for High Speed and Wide Voltage Range Interface.pdf
Low Resistance Analog Switches Permit Speaker Switching in Audio Devices.pdf
Low-Icct Analog Switches for Ultra-Portable Designs.pdf
Selecting the Right CMOS Analog Switch.pdf
Product Selection Guide
Interface and System Interconnect Selection Guide.pdf
Product Search
Parametric Search
Product You Recently Viewed
@2014 Union Semiconductor Limited. All rights Reserved.
FOLLOW US