首页 > 英联产品 > 电源供应 > 开关稳压器 > LED照明驱动降压型转换器
UM1360Y
具有内部开关管的40V 1A LED驱动器
Datasheet Reliability Report Package Information Order Sample  
Key Specifications
Part Number Description Status Input Voltage(Type) Vin(Min)(V) Vin(Max)(V) Iout(Max)(A) Vout(Min)(V) Vout(Max)(V) Regulated Outputs(.) Topology Dimming Method Power Factor Correction(Min) Special Features Operating Temperature Range(℃) Pin/Package EV Kit Available?
UM1360Y 具有内部开关管的40V 1A LED驱动器 ACTIVE DC/DC 6 40 1 - 40 1 Buck Analog, PWM N/A Enable/Shutdown, Soft-start, Thermal Shutdown, Integrated Switch -40 to 85 5/SOT89 Y
View All>>

Product Description  

The UM1360 is a PWM step-down converter with internal power switch, designed for driving single or multiple series connected LEDs efficiently from a voltage source higher than the LED voltage. The UM1360 can drive up to 10 series connected LEDs. The device operates from an input supply between 6V and 40V and employs hysteretic control with a high side current sense resistor to set the constant output current up to 1A. The device is well suited for applications requiring a wide input range. The high side current sensing and an integrated current sensing circuitry minimize the number of external components while delivering an accurate average output current. Depending upon supply voltage and external components, this device can provide up to 30 watts of output power.
Output current can be adjusted below the set value, by applying an external control signal to the VSET pin. The VSET pin will accept either a DC voltage or a PWM waveform. Dedicated pulse width modulation (PWM) input enables pulsed LED dimming over a wide range of brightness levels. A hysteretic control method ensures excellent input supply rejection and fast response during load transients and PWM dimming.
Applying a voltage of 0.2V or lower to the VSET pin turns the output off and switches the device into a low current standby state. The UM1360 employs spread spectrum technique to greatly reduce its interference to other part of the system.
The UM1360 comes in small SOT89-5 package. It is ideal for industrial and general lighting applications.
 
Features
 
- Hysteretic Control with High Side Current Sensing
- Integrated 40V 0.5Ω NDMOS
- Up to 98% Efficiency
- Wide Input Voltage Range: 6V to 40V
- 50V Transient Capability
- ±5% LED Current Accuracy
- Adjustable Constant LED Current
- Single Pin On/Off and Brightness Control Using DC Voltage or PWM
- Spread Spectrum Driver
- Over Temperature, Open Circuit LED Protection
- Up to 1MHz Switching Frequency
- Pb-Free SOT89-5 Package
 
Typical Application Circuit

 

  
Applications
 
- Low Voltage Halogen Replacement LEDs
- Low Voltage Industrial Lighting
- LED Back-Side Lighting
- Illuminated Signs
- DC/DC or AC/DC LED Driver Application
- General Purpose, Constant Current Source
 
Pin Configurations  

                
  
Ordering Information

Part Number
Packaging Type
Marking Code
Shipping Qty
UM1360Y
SOT89-5
UM1360Y
1000pcs/7Inch
Tape & Reel
 

EV Board User’s Guide

http://www.union-ic.com/upload/UserGuide/UM1360%20EV%20Board%20Users%20Guide-01.pdf
 
@2014 Union Semiconductor Limited. All rights Reserved.
FOLLOW US