首页 > 英联产品 > 接口 > RS485接口
UM3352EEPA
具有±15kV ESD 保护、限摆率、失效保护、真正的 RS-485 收发器
Datasheet Reliability Report Package Information Order Sample  
Key Specifications
Part Number Description Status Supply Voltage(Nom)(V) No. of TX No. of RX Duplex Signaling Rate(Max)(Mbps) ESD Contact (kV) ESD Air (kV) Number of Nodes Common Mode Range(V) Fail Safe ICC(Max) (mA) Operating Temperature Range(℃) Pin/Package EV Kit Available?
UM3352EEPA 具有±15kV ESD 保护、限摆率、失效保护、真正的 RS-485 收发器 Active 5 1 1 Half 0.5 ±8 ±15 256 -7 to 12 Idle, Open, Short 0.45 -40 to 85 8/DIP
View All>>   
Product Description
 
The UM3352E series are ±15kV ESD-protected, high-speed, half-duplex transceivers for RS-485 communication that contain one driver and one receiver. The device features fail-safe circuitry, which guarantees a logic-high receiver output when the receiver inputs are open, shorted or idle. This means that the receiver output will be logic high if all transmitters on a terminated bus are disabled (high impedance). The UM3352E features reduced slew-rate driver that minimizes EMI and reduces reflections caused by improperly terminated cables, allowing error-free data transmission up to 500kbps. It also features enhanced ESD protection. All transmitter outputs and receiver inputs incorporate advanced structures allowing them to survive ESD events in excess of ±8kV Human Body Mode and ±15kV IEC61000-4-2 Air Discharge Mode, ±8kV IEC61000-4-2 Contact Discharge Mode. New ESD structures protect the device whether or not it is powered up and without degrading the RS-485 common mode range of -7V to 12V. The UM3352E includes a hot swap circuit inside, which allows live cable insertion and removal. Proprietary protection circuit built on A and B ports, can dissipate high surge current up to 6A to ground.
The transceivers typically draw 450μA of supply current when unloaded, or when fully loaded with the drivers disabled. The device has a 1/8-unit-load receiver input impedance that allows up to 256 transceivers on the bus and are intended for half-duplex communications.

 
Features
 
- ESD Protection for RS-485 I/O Pins 
  ±8kV—Human Body Mode 
  ±15kV—IEC61000-4-2, Air Discharge Mode 
  ±8kV—IEC61000-4-2, Contact Discharge Mode 
- True Fail-Safe Receiver
- Enhanced Slew-Rate Limiting Facilitates Error-Free Data Transmission
- 2µA Low-Current Shutdown Mode
- -7V to +12V Common-Mode Input Voltage Range
- Allows up to 256 Transceivers on the Bus
- Thermal Shutdown
- Current-Limiting for Driver Overload Protection
- Hot Swap Capability
 
  
Applications
 
- RS-485 Transceivers
- Intelligent Meters and Sensors
- Industrial Control
- Lighting Systems
- Security Systems
- HVAC Application
 
 
Pin Configurations
 
 
Ordering Information

Part Number
Operating Temperature
Mark Code
Package Type
Shipping Qty
UM3352EEPA
-40°C to +85°C
UM3352EEPA
DIP8
50pcs/Tube
Application Notes
微处理器超长启动周期中的外部看门狗管理方案v2.pdf
利用3.3V供电RS485接口实现远距离数据通信.pdf
高速低电源电压逻辑电平转换电路.pdf
超低功耗LDO线性稳压器.pdf
I2C-BUS电平转换芯片在安防产品的应用.pdf
0201超小封装ESD保护器件.pdf
Analog Switch Permits Port Sharing in Portable Equipment.pdf
Balanced Modulator Demodulator Employing UM4684.pdf
Level Shifter for High Speed and Wide Voltage Range Interface.pdf
Low Resistance Analog Switches Permit Speaker Switching in Audio Devices.pdf
Low-Icct Analog Switches for Ultra-Portable Designs.pdf
Selecting the Right CMOS Analog Switch.pdf
Product Selection Guide
Interface and System Interconnect Selection Guide.pdf
Product Search
Parametric Search
Product You Recently Viewed
@2014 Union Semiconductor Limited. All rights Reserved.
FOLLOW US